product11 - Bulk Cloned-manufacture,factory,supplier from China

Moistureproof board is to add a certain proportion of moistureproof particles in the production process of the base material, also known as melamine board (base material), which can greatly reduce the degree of expansion of the board when encountering water.  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

The following aspects should be paid attention to when choosing medium density fiberboard;1. From the appearance, check whether the thickness and density are uniform, whether the corners are damaged, whether there are delamination, blister, charcolization, etc., and whether there are soft parts.2. When conditions permit, you can saw a small piece of medium density fiberboard and soak it in water with a water temperature of 20°C for 24 hours to observe its thickness change, and at the same time observe whether there are small bulges on the surface of the board.

      Density board is called density fiberboard. It is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.     According to its density, it can be divided into high-density fiberboard, medium-density fiberboard and low-density fiberboard.

Decoration Particle Board Introduction:Particle board is made of wood or other lignocellulosic materials, applied adhesive and then glued together under the action of heat and pressure, also known as shredded board. It is mainly used in furniture manufacturing, construction industry and train and carriage manufacturing.Decoration Particle Board Advantages:A. Good sound absorption, sound insulation and thermal insulation properties;B. The internal granular crossed and staggered structure, the performance of each direction is basically the same, and the lateral bearing capacity is good;C.

Characteristics of OSB1. Wide sources of raw materials and low prices.The raw materials of directional particle board are mainly small diameter wood of soft coniferous wood and broad-leaf wood, fast-growing thinning forest, such as eucalyptus, Chinese fir, poplar thinning wood, etc., with a wide range of sources.2. High output rateCompared with other types of wood-based boards, oriented particle board has a higher output rate.

MDF Products Display     MDF (Medium Density Fibreboard) is by far the most commonly used carpentry material and it is compatible with many different finishes – including simple and lacquered finishes, glued to natural boards, melamine boards and even graphic prints. They can also be used in other places, such as cladding of walls and doors.

Fire Resistant MDF Features:1.Excellent flame retardant performance: Comply with the B1-B/B1-C regulations of GB8624-2012 "Classification of Combustion Behavior of Building Materials and Products". 2. Excellent environmental protection performance: the amount of formaldehyde released has reached the level of E0 and E1 in GB18580-2017 "Limits of formaldehyde release in wood-based panels and their products for interior decoration materials"3.

Advantages of MDF1. The internal structure is uniform, the density is moderate, the dimensional stability is good, the deformation is small, and the physical and mechanical properties are moderate.2. The surface is smooth and smooth, with good machining performance. It can be pasted with sliced veneer, patterns and novel and beautiful decorative papers. Therefore, it is very popular in home decoration and is often used to make furniture and partitions.3. It can be used as the middle frame and middle clip strip in the modern decorative frameless painting.

Medium density fiberboard    MDF has good physical and mechanical properties and processing properties, and can be made into plates of different thicknesses. Therefore, it is widely used in furniture manufacturing, construction and interior decoration industries.    Medium density fiberboard is a homogeneous porous material with good acoustic performance. It is a good material for making speakers, TV shells and musical instruments.   In addition, it can also be used for ships, vehicles, sports equipment, floors, wallboards, diaphragms, etc.

    Particleboard, also known as chipboard, flakeboard, is a wood-based panel that is made of wood or other lignocellulosic materials and glued under heat and pressure after applying an adhesive. It is mainly used in furniture manufacturing and construction industry as well as train and car carriage manufacturing.Method for judging the quality of particleboard wardrobes1. From the appearance point of view, look at the size and shape of the sawdust particles in the center of the cross section. The length is generally 5-10MM.

     Particleboard is also called chipboard or flake board. it's a form of timber-primarily based panel fabricated from wood or different lignocellulosic materials and glued beneath warmth and strain after applying adhesive. it is also called particle board. it is specially used in fixtures production and construction enterprise, in addition to train and car carriage production.Advantage of  Particle Board A. suitable sound absorption, sound insulation and heat insulation performance;B.

 Advantages of FR MDF/Fire Resistant MDF 1.Excellent flame retardant performance: Comply with the B1 regulations of GB8624-2012 "Classification of Combustion behavior of Building Materials and Products".2.Excellent environmental protection performance: the amount of formaldehyde released reaches the level of E0 and E1 in GB18580-2017 "Limits of formaldehyde release in wood-based panels and their products for interior decoration materials"3.

FR MDF Advantages:1.The fireproof board has low hygroscopicity, stable water-absorbing thickness expansion rate, and excellent moisture-proof performance. It is especially suitable for secondary processing such as finishes, adhesives, and paints.

Medium Density Fiberboard Introduction:Density board, also known as fiberboard (full name: MDF fiberboard), is a man-made board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high density board, medium density board and low density board. Mainly used for laminate flooring, door panels, partition walls, furniture, etc.

     Particleboard, as a very common decorative material at home and abroad, in addition to conventional furniture manufacturing, particleboard actually has other wider uses, such as suspended ceilings, partition walls, interior decoration, etc.Particleboard has uniform density and thickness, and smooth surface. It is a good veneer substrate. Industrial-grade particleboard can be used in many veneer materials and is very suitable as a veneer substrate.  2.Particleboard furniture refers to furniture that directly uses particleboard as a finish.

   MDF is a man-made board made of wood or plant fiber, mixed with adhesives and waterproofing agents, etc., and pressed under high temperature and high pressure. It is an ideal man-made board for furniture production.Advantages of MDF:Medium density fiberboard has uniform internal structure, moderate density, strong stability, not easy to deform or crack, and durable.2. Medium density fiberboard has a smooth surface, strong plasticity, and good production and processing performance.

The differences between flame-retardant MDF and ordinary MDF are analyzed one by one as follows: 1. Color The color of flame-retardant MDF is dyed with red dye, so red MDF is not necessarily flame-retardant MDF Board, this point cannot be identified. 2. Physical and mechanical properties Due to the addition of flame retardants, the water-absorbing expansion of the board is affected to a certain extent. Therefore, testing the water-absorbing expansion coefficient of the board can preliminarily judge whether the flame-retardant MDF can meet the use requirements.

The raw materials for making particleboard include wood or wood fiber materials, adhesives and additives. The former accounts for more than 90% of the dry weight of the board. The wood raw materials are mostly taken from felled wood in the forest area, small diameter wood (usually less than 8 cm in diameter), felling residues and wood processing residues. Wood chips, shavings, wood filaments, sawdust, etc. processed into flakes, strips, needles and granules are called chips.

   The production of chipboard in China has gone through a repeated process from the rise in the 1980s to the decline in the 1990s and then to the rise again in 2000. After the particle board was abandoned by the market due to poor quality and other reasons, many particle board enterprises learned a lesson, introduced advanced production lines from abroad and improved the technology level.    After that, the quality of particle board in China has improved significantly, and it has been accepted by the market again.

     Particleboard is also called particle board or particle board. It is a kind of wood-based panel made of wood or other lignocellulosic materials and glued under heat and pressure after applying adhesive. It is also called particle board.

Particle Board Classification:According to the use: Class A particle board; Type B particle boardAccording to the structure of particleboard, it can be divided into: single-layer particleboard; Three layer particle board; Graded structure particle board; Oriented strand board; Waffle particle board; Moulded particleboard.According to the manufacturing method, it can be divided into: flat pressed particle board; Extrude particle board.

Which is better, particleboard or density boardThe physical properties of density board and particle board are different, and there are not small differences in many aspects. When we evaluate building materials, it is difficult to determine which one is strong and which is weak. Most of the time, we need to decide which building materials to choose according to the occasion and space used. Of course, from the perspective of interior space, density board is obviously better than particle board. Why is this?The nature of the whole MDF board is the same, and its plasticity is very good.

What is particle board?  Particle board is also called chipboard or flakeboard. It is made of wood or other nitrocellulose materials. It is a wood-based board glued under the action of heat and pressure after applying an adhesive.

How to choose particle board1. Check the particleboard test report. Generally, products sold by regular manufacturers have test reports from relevant departments. The test report includes some important physical and mechanical performance indicators. Among them, the detection value of free formaldehyde, which is a mandatory indicator, should be as low as possible.2. Smell the smell of particleboard. Particleboard is processed from wood chips and will emit a delicate wood smell, indicating that the release of formaldehyde is less.